Screen protectors are essential for protecting your smartphone. They can help prevent scratches, dirt, and other damage to your phone.
But applying an Apple screen protector can be tricky and often requires patience and precision to get the job done right.
Here are simple steps to help you apply a screen protector for Apple devices.
1. Clean Your Device
Before you apply the Apple screen protector, it is important to make sure that your device is clean of dust and debris.
Use a soft cloth or cotton ball with an alcohol-based cleaner to wipe down the surface of your phone. Make sure you avoid any harsh chemicals or abrasives that could damage the device’s screen or casing.
2. Measure and Cut
Once you’ve determined the size of the Apple screen protector that best fits your device, use a ruler or straight edge to measure out where you need to cut the protector. Then, carefully cut out the appropriate size with scissors.
3. Peel Off Backing
Peel off one side of the backing from the protective film before applying it to your device’s display. Be sure not to touch either side of the film, as this may leave fingerprints or smudges on both sides of it.
4. Place Film on the Device
Place one end of the protective film at one corner of your device’s display, then slowly move it across until it covers the entire display area.
If there are any bubbles when putting on the film, gently press them out toward the edges of your display using a credit card or something similar with a flat edge.
5. Peel Off Top Layer
After ensuring that all bubbles have been removed from underneath, peel off the top layer from your protective film and discard it in a safe place away from children and pets.
6. Wipe Down Film
Use another clean cloth with alcohol-based cleaner or water to wipe down any remaining dust particles on top of your newly applied film before letting it dry completely. This will ensure that no dust particles are trapped under it once dried.
7. Let Dry Completely
Once wiped down, let your newly applied film sit undisturbed for at least 24 hours before using any features such as touchscreen capability or camera functions on your device again so that they can set properly without interference from moisture still present on either side of the protective film layer when first applied.
8. Reattach the Case or Cover
After 24 hours have passed and all moisture has been properly dried out from both sides of your new protective layer, reattach any cases or covers back onto your device if necessary before turning on any features such as touchscreen capability or camera functions again.
9. Test Features
Once everything has been properly reattached and secured onto its designated place on top of your phone’s casing, proceed by testing out all features, such as touchscreen capability and camera functions, one by one in order to make sure everything is working smoothly and correctly before fully utilizing them again.
You’re done. Your device’s display is now protected by an extra layer, giving you added peace of mind knowing that scratches, dirt, and smudges will be kept away from harm’s reach.
Applying an Apple screen protector you can buy from ViaScreens can seem intimidating, but with these easy steps, you’ll be able to protect yours quickly and effectively.
With proper care, handling, and occasional cleaning-up maintenance sessions, this layer will stay in tip-top shape for months.
So, take some time today to follow these simple steps for protecting your smartphone’s display. You won’t regret it.